NANOSKIN AUTOSCRUB System works fast and achieves professional results with the new advanced rubber polymer technology, which replaces the use of clay bars. It safely and easily removes paint over spray, water spots, fresh tree sap, rail dust and other bonded surface contaminants from the surface of automotive paint, glass, moldings and plastic. Unlike the clay bar, the AUTOSCRUB can be cleaned by simply rinsing off the accumulated contaminates with water. If you drop the AUTOSCRUB on the ground, no worries, just rinse the sponge pad clean and you're ready to keep using it. Easy glides allows for sturdy and controlled handling, unlike clay bars where constant reshaping is required.

Application Use:
• For surface prep., use with NANOSKIN GLIDE Instant Spray Lubricant
• To achieve best result on the paint, use with NANOSKIN NANO SHOCK Hydrophobic Spray Lubricant Sealant.
• For glass prep. and hydrophilic anti-static sealant, use with RAIN PREP Glass Cleaner/Activator then follow with RAIN Glass Sealant.

NOTE:
Sufficient lubrication is crucial to the AUTOSCRUB application.
Plain water is NOT an adequate lubricant.
AUTOSCRUB is not solvent resistant.
Remove tar & grease before application

Helpful Tips:
The AUTOSCRUB has a protective coating to ensure stability within transportation.
To break in the pad, moisten the AUTOSCRUB with desired lubricant.
Moisten a portion of window glass or other glass surface. Rub AUTOSCRUB in circular motion against the glass for 30~60 seconds. You may see a white soapy foam. This is the protective sealant coming off. Don 't use until the polymerized rubber is soft and slightly tacky.
Cold temperatures may stiffen pad. Warm surface before using.
There is a significant difference between NANOSKIN AUTOSCRUB and clay bars. An outstanding machine/advanced polymer combination makes AUTOSCRUB the best contamination removal tool ever.

Compare with clay bars:

	AUTOSCRUB Towel	Traditional Clay Bars
Application Tool	Hand	Hand
Durability	50~80 times	10~15 times
Washable	Yes	No
Temp. Sensitivity	Low to Medium	Medium to High
Use with Lubricant	Yes	Yes
Overspray	Fast to remove	Slow to remove
Brake Dust	Fast to remove	Slow to remove
Rail Dust	Fast to remove	Hard to remove
Industrial Pollution	Fast to remove	Slow to remove
Reshape	Not required	Required

DIRECTIONS for use Directions:

Step 1: Spray sufficient amount of lubricant on the vehicle glass surface Note: Do not allow the lubricant to run dry on the surface.	Step 2: Slide Autoscrub across the lubricated surface in a back and forth motion with light to medium pressure. NOTE: Work in a 12"x 12" area at a time. Do not allow lubricant to dry on the surface.	Regularly fold Autoscrub towel for a fresh surface to continue or restart decontamination.
Use Autoscrub towel for hard to reach areas.	Step 3: Wipe and buff dry residual lubricant off the surface using light pressure.

FOLD AUTOSCRUB TO KEEP CLEAN UNTIL NEXT USE

TechnicalInfo Contains:
Coming soon...